- 1 - 12" x 1.5" PVC pipe
- 1 - 1.5" cap
- 1 - 1.5" elbow connector
- 1 - 35mm canister
- 6 - 1.5" circular magnets / (Velcro strip optional)
- PVC pipe sealant
- Some krazy glue or other permanent glue
I have found that a 35mm canister fits absolutely perfect within a 1.5inch PVC elbow and pipe. Which is perfect for this cache. Simply use some pipe sealant and glue the cap to the bottom of one of the 12" PVC pipe ends. Then glue the elbow to the other end and allow to dry. It should look like a big candy cane when complete.
Now take some krazy glue and glue one of the circular magnets to the bottom of the 35mm canister. Allow to dry. This would be a good time to print out a logsheet for the 35mm canister and get that ready. *** Don't forget one of those little log book baggies to keep it dry.
Place the 35mm canister bottom side first into the elbow and guide it until it falls all the way down into the pipe. Take the last circular magnet and place it on the bottom of the cache into the cap. It should fit just right and you will feel both magnets attract to each other. This ensures the cache stays in place and adds a bit more challenge to the cacher who has to figure out to remove the magnet to get the cache out of the tube.
Place your cache with the cap side down as close to a wall and let the magnets hold it in place on some metallic object like a drain or electrical box. It should look like it is a natural pipe coming out of the ground.
There you have it a unique and clever cache made from scratch.
If you have a clever PVC cache idea, photo or comment please send your submissions to email@example.com.